TK102 TK103 GT06 MVT310 GT60 GPS TRACKING GPS Tracker Meitrack
For Auto, scooter and motorcycle
Support 30-100V high voltage, sutable for E-bike, motorbike.
Please read the manual carefully before use the GPS Tracker so that
you can install the device correctly and activate it quickly on the
internet. The outlook and true color are subject to the actual
2. Technical parameter
1). GSM: 850/900/1800/1900 Quad band
2). GPRS: Class12, TCP/IP
3). Working Voltage: 30-100V DC
4). Working current: 22mA (30VDC)
5). Working current: 12mA (100VDC)
6). GPS locating time: Cold start38s(Open sky)
Hot start2s(Open sky)
7). GPS Precision: 10m(2D RM)
8). Working temperature: -20~+70
9). Working humidity: 20%~80%RH
10). Measurement: 87(L)× 43(W)× 14(H)mm
3. Out look
4. Device status indicators
4.1Connect DC 9-24V power supply and the red LED will light
4.2The green LED glistens when searching the GPS signals. When GPS
works, the LED lights continuously.
4.3The intermediate blue LED (GSM signal state)
GSM signal is normal, blue LED light long bright. No GSM signal,
the blue LED flashes.
GPS LED not fixed, flashes(0.2 sec/2 sec), Positioning long bright;
GSM LED no signal, flashes(0.2 sec/2 sec), Signal normal long
Power LED: Long bright;
All LEDs will turn off after 5 minutes. When there is a new call,
the LEDs will relight and turn off 5 minutes later.
5.1 Preparation for the installation
5.1. 1 Product Check. Open the packing box and check the device's
model and accessories. If the model is wrong or the accessories not
complete, please contact the dealer.
5.1. 2 Choose SIM card. Please insert a SIM card to the device.
Please take dealer's advice as reference.
5.1. 3 SIM card installation. Discharge the cover of the device and
uncover the SIM card holder. Then insert the SIM card and cover SIM
card holder (as follows).
5.1. 4 Put back the front cover and screw it up.
5.1. 5 Connect the device to the 9-24Vpower supply. (the red LED
5.1. 6 Install the device in the hidden place of the car;
The SIM card must be with GPRS function and enough deposit. If your
SIM card need input PIN when power on, please cancel it.
The GPS tracker must be installed under professional personnel.
1) Please install the device in the hidden place as followings:
Under Front windshield;
In the front instrument panel;
Under back windshield;
2) Avoid being placed with signal radiators like reverse sensor;
3) The device has GSM antenna and GPS antenna inside. Please ensure
the receiving side of the device is face up and without metal
Note: The metal cover will lessen the receiving of GPS signals. 6.
The device connecting requirements.
6. Device wiring requirements
6.1 The device power supply is DC 9-24V. The red line is positive
pole while the black line is negative pole.
6.2 The negative pole of power supply connects with ground or the
metals. Please do not connect with other ground lines.
6.3 When finishing the power supply wire connection, please make
the plug of power supply to the device.
7. The Device Working
7.1 Power on: The device will be power on when connecting to the
current. Then the three LED indicators will light continuously. The
device will upload the data to the online platform (the default
interval of uploading data is 10seconds). When the car is in static
state for a long time, the device will be in energy saving mode and
it will be more smart and precise.
7.2Power off: Pull off the power plug then power off the device.